• Phone

    0086-754-82254878

  • Address

    Zhongzhai Industrial Zone, Heping Town, Chaoyang District, Shantou, Guangdong, China (Mainland)

  • E-mail

    k@waimaotong.com

LatestProducts

                            HYD-92 Series Insect Killer lamp

HYD-92 Series Insect Killer lamp

HYD-92 Series Insect Killer lamp,Lights & Lighting,Professional Lighting
INQUIRY PRECISE INQUIRY
Description

Overview

      INSTRUCTIONS FOR ELECTRIC INSECT KILLER

 

Insects such as flies etc. are attracted by light. Our product uses this characteristic to attract flying insects using harmless UV light and kills them by high voltage electric shock.

Features:

Non-Corrosive Aluminum alloy shell construction.

The unit can be suspended from ceiling, shelf mounted or free standing.

Low Consumption, safe, and effective.

Easy to operate and clean.

Environmental friendly with no chemicals.

Application:

Ideal for Home and Commercial use.

Use:

1. Before use, ensure that the power plug is connected to a properly installed wall socket that is easily accessible and the supply voltage matches the rating plate.

2. Ensure the power socket used is properly earthed.

3. In order to get the best results, ensure that this product is placed appropriately so that it will have maximum impact against the insects.

4. Once the power supply is switched "On" you should see the tube emitting purple light. This indicates that the product is in operation.

5. It is normal to hear a cracking or zapping sound when insects touch the electrified net.

6. After a period of use, the bottom tray may need cleaning. In order to do this, first please ensure that the power is switched off and the plug is removed from the socket. Ensure that the outer grid is fully discharged to remove any residual charge. This can be done using a screwdriver to short any two grid wires. Please be cautious while doing this and ensure that the screwdriver is held using the insulated handle. Repeat the procedure with the inner grid. Then remove the bottom tray to clean.

Warning and Notices:

1. Ensure that the power plug is connected to a properly installed wall socket that is easily accessible and the supply voltage matches the rating plate.

2. Ensure that the power cord cannot be damaged by sharp edges or hot surfaces.

3. Ensure the power socket used is properly earthed.

4. Before replacing the tube, starter or cleaning the bottom tray, ensure that the power supply is switched off and the plug is removed from the socket. Also, please make sure that the net is fully discharged before touching any parts of the unit.

5. Not suitable for outdoor use.

6. If the power supply cord is damaged, it must be replaced by a qualified electrician.

7. Children should be supervised at all times to ensure they do not play with or in any other way try to operate or come into contact with this appliance

8. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been given instruction concerning use of the appliance by a person responsible for their safety.

9. Protect the appliance from moisture, dripping water and splashing: THERE IS THE RISK OF ELECTRIC SHOCK.

10. Do not operate the appliance if it or the power cord show visible signs of damage or the appliance has been dropped.

11. To avoid any risk, do not make any modifications to the product.

12. For Indoor use only.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

- Children shall not play with the appliance.

- Cleaning and user maintenance shall not be made by children without supervision

- Appliance for indoor use only.

- Appliance are not suitable for use in barns, stables and similar locations.

- The appliance is to be kept out of reach of children.

- The appliance is not be used in locations where flammable vapour or explosive dust is likely to exist.

- You should replace the same specification of the Tube lamp and starter.And can download the instruction manual from http://hongyangco.waimaotong.com 

 

    

 

 

Information on the disposal for Waste Electrical & Electronic Equipment (WEEE) This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general

household waste. For proper disposal for treatment, recovery and recycling,please take these products to designated collection points where they will be accepted on a free of charge basis. In some countries you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste

handling. Please contact your local authority for further details of your nearest collection point for WEEE.